I am offering most of the components of my air/water intercooler system on a piece by piece basis.  See component listing and pricing below.  Please inquire for specific items.  I will be adding components as I get them photographed/drawn. Items shown are in stock as of March 22nd, 2005 unless noted below. Note that Paypal can be used to pay for some of the items below.

	Merkur Big Clutch Ball Clevis.  This stainless steel clevis is specially made to permit the usage of the stock Merkur T-9 clutch Cable when installing a T-5 transmission in the XR4Ti. $20 with shipping included.
	Chicken Wire Amnesty Grille in black.  This grille insert is specially made to replace the chicken wire like material that comes in the Cosworth Style grilles. This one is black and is attached with epoxy (not included.) $32 with shipping included.
	Chicken Wire Amnesty Grille in silver.  This grille insert is specially made to replace the chicken wire like material that comes in the Cosworth Style grilles. This one is Silver and is attached with epoxy (not included.) $32 with shipping included.
	This is a braided stainless steel covered hose that is made to replace the crusty old hoses on the XR. It comes with both fittings to replace the parts from the turbo outlet to the block $42 with shipping included.
	This is my custom casting that adapts the TC intercooler for use on the Merkur's stock turbo.  I prefer to weld them, but they may possibly be used with a rubber hose and a clamp. $43 shipped.
	This is one of my jacketed air/water intercoolers. It has the jacket welded on, 3/4" inlets and outlets, and internal baffles. This has the hose style inlet connector like the SVO or the '88 or '88 Thunderbird Turbocoupe. Cost is $300 shipping incl. Hoses, clamps, and instructions incl. Currently unavailable.
	This is one of my jacketed air/water intercoolers. It has the jacket welded on, 3/4" inlets and outlets, and internal baffles. This has the cast turbo outlet adapter welded on and the inside of the weld ground flush. This allows it to fit the stock Garret T-3 turbo that comes on the Merkurs and Early t_birds. Cost is $360 shipping incl. Bolts, gaskets, hoses, clamps, instructions, incl. Currently unavailable
	Machined Turbo Inlet Adapter.  Made for repositioning the turbo inlet after rotating the stock turbo to fit the Thunderbird Turbocoupe Intercooler (below) $33 shipped.  This part is machined from a 4" aluminum billet and comes with the proper bolts and a gasket.  Note that these pieces are no longer hard anodized.
	Thunderbird Intercooler modified for use on a 2.3L engine with the stock Garrett turbo (Stock Merkur.)  This is a custom casting that I have welded onto the intercooler. The casting is welded on using a mock up of the engine for a precise fit.  The inside weld is ground flush, and then it is painted w/ high temp black. $165 shipped. Currently out of stock.
	Stainless Steel 2.3L Bolt Set.  $39 shipped.  This bolt set includes stainless steel socket head cap screws for the intake manifold, valve cover, water pump, distributor hold, down, etc... Click for more info
	Ford Taurus SHO Stainless Steel Bolt Set.  $36 shipped.  The kit that I am offering comes with a 64 piece fastener set in stainless steel. Bolts, flat washers, and lockwashers are all stainless steel and the button head style bolts (similar to the ones in the middle of the valve cover) can be polished to a high luster using a compound and buffing wheel (see the pic below.) The bolts included in the kit have a plain stainless finish, but I will polish the bolt heads for $10 more. The bolts are bagged and come with an instruction diagram showing their locations. The set includes bolts for the front engine bracket, the intake manifold brackets, idle air control motor, DIS module , throttle body, fuel rail hold down, cam cover, alternator bracket, and others. I do not include the intake manifold to head bolts, as these should be torqued in sequence and are not as visible as the others. I have tried to include all of the most visible fasteners on the SHO's Yamaha engine. Click for more info
	150 mph speedometer face with free instrument cluster attached ! $85 shipping incl. Has not been tested, only the speedo face is guaranteed.
	Fuse box cover.. Good condition. $13 shipping incl.
	Grey or Blue (picture shows black) fiberboard panel. This goes on the bottom side of the hatch and covers the rear wiper motor, etc...(Great Condition) $35 shipping incl.
Starter	$15 + shipping
	Stock thunderbird turbocoupe intercooler inlet hose, rubber. $10 ea. +$3 shipping.
	Cruise control button from dash $13 + shipping. Windshield washer float switch $20 Passenger door Handle $13 +shipping Passenger wiper $10 + shipping. Triple point switch $30 shipped Turbo inlet hose $10 + shipping Power steering cap $5 + shipping

Yellow and red bumper reflectors $7 each

City lights (next to headlights) $7 each

Saab 900 third brake light $7 each

Third brake light lens (from 1987 XR) $7 each

EGR tube with used EGR valve $18 each

Bare XR EGR Tube (the one you crush when removing the exhaust manifold $10 each

Wiper arm Passenger $6

Front bumper shock absorber $5

Right XR headlight (stock) $16

Stock XR steering wheel $15

XR Manual speedo cable $20

T-9 SHift knob $5

T-9 heat shield $14

Interior Parts ******************

Sunroof rubber headliner retainer piece $8

Nice rear carpet in Gray $20

Nice gray leather headrest $10

Driver's pop out window (tinted) $15

XR (or Scorpio) front stock calipers with good pads $20 each. 2 pair are available.

Original cargo net $15

Ask for what you need, but don't see.